UV222 Industrial – Disinfecion lamp for industrial use
With its IP66 rating, UV222 Industrial is protected against pressurised water and ready to be installed in all settings requiring intensive and regular cleaning.
For industry use
Ultraviolet light is widely used for disinfection in many industries, including medicine and food processing. The application of this technology in livestock production is a more recent development and is increasingly being used, especially on swine farms, as producers look for ways to improve biosecurity in response to frequent outbreaks of devastating diseases, such as African swine fever.
UV222 Industrial has been developed combining the benefits Far UV-C light and a housing adapted to the hardest environments. Thanks to its IP66 rating, UV222 Industrial is dust-tight and protected against pressurised water, which makes it ideal for the disinfection of production areas, barns, and stables for the protection of living animals, offering continuous disinfection with harmless radiation.
Specifications
| Light source | Krypton chloride excimer lamp |
| Wave length | 222 nm |
| Output (60° beam angle) | 115 mW (Typical) |
| Output (100° beam angle) | 70 mW (Typical) |
| Input voltage | 85-305V AC 50/60 Hz |
| Mode | Continuous / duty cycle |
| Max power consumption | 17 W |
| Weight | 3 kg (6.6 lbs) |
| Dimensions | 300 x 168 x 113 mm (11.8 x 6.6 x 4.4 in) |
| Power lead (rubber) | 3 x 0.75 mm² / 10 m (18 AWG / 32.8 ft) |
| Operating temperature | -10° to + 50° C (14° to 122° F) |
Beam angle
UV222 is available on both 60° and 100°, but every lamp is measured after production and sent with its unique specifications report.
Light measurement results
|
60° beam angle |
100° beam angle |
|
|---|---|---|
|
126.92 mW |
Output – total optical power flux, 200 nm – 850 nm |
75.72 mW |
|
120.79 mW |
Far UV-C 200 nm – 230 nm |
58.79 mW |
|
6.81 mW |
VIS-IR: 400 nm – 850 nm |
10.71 mW |
|
0.926 % |
Radiated power/lamp power |
0.57 % |
|
222 nm |
Peak emission wavelength |
222 nm |
|
13.8 μW/cm2 |
UV (222 nm) irradiance at centre at 1 m (3’ 10”) |
3.2 μW/cm2 |
|
60 ° |
Beam angle |
100 ° |
Photometrics and exposure time SARS-CoV2/COVID-19
The spatial and spectral distribution of the light is measured on each lamp using a 2-axis goniometer giving the entire 3D distribution of the Far UV-C light emitted by it.
60° beam angle
Peak emission wavelength: 222 nm
Output power in range (200-230 nm): 115 mW
Dose needed (222 nm, COVID-19) 90% inactivation for
aerosols: 390 μJ/cm2
Dose needed (222 nm, COVID-19) 90% inactivation for
surfaces: 600 μJ/cm2
100° beam angle
Peak emission wavelength: 222 nm
Output power in range (200-230 nm): 70 mW
Dose needed (222 nm, COVID-19) 90% inactivation for
aerosols: 390 μJ/cm2
Dose needed (222 nm, COVID-19) 90% inactivation for
surfaces: 600 μJ/cm2
Wavelength
■ UV222 Far UV-C excimer lamp with an optical band-pass filter
■ A typical krypton chloride 222 nm Far UV-C excimer lamp without an optical band-pass filter
WARNING!
Unfiltered Far UV-C can cause cancer and may increase the risk of cataracts.
Dimensions
UV222 Industrial includes an installation bracket for fixing the lamp on any surface.
Colours
- The standard colour is brushed aluminium.
- Custom colours are available on request.
Installation
The installation plate allows for direct set up on surfaces like walls and ceilings, as well as attachment to wall brackets with tilt and swivel functions, clamps, etc.
Ordering information
| UV222 Industrial 60°, brushed aluminium | 80301500 |
| UV222 Industrial 60°, custom colour | 80301501 |
| UV222 Industrial 100°, brushed aluminium | 80301510 |
| UV222 Industrial 100°, custom colour | 80301511 |
