UV222 Vehicle – For ambulances and other vehicles
Compact and easy to clean, UV222 Vehicle is ideal to be installed in lifts, public transport, and medically equipped vehicles.
Ambulances and lifts
Small indoor spaces, such as vehicles and lifts, provide the right conditions to boost the spread of pathogens. To meet the increasing demands for higher hygiene in the transport sector, we have created UV222 Vehicle, to reduce the risk of infection in these areas.
UV222 Vehicle can be easily installed in ambulances, where fast and proper disinfection is essential for the transport of patients. The lamp will provide a continuous extra layer of disinfection without extending the cleaning process.
Lifts have also been appointed during the pandemic as sensitive areas for transmission of pathogens, and many are installed in buildings without proper ventilation systems. UV222 Vehicle can provide a disinfection as efficient as 35 air changes per hour.
Specifications
| Light source | Krypton chloride excimer lamp |
| Wave length | 222 nm |
| Output (60° beam angle) | 115 mW (Typical) |
| Output (100° beam angle) | 70 mW (Typical) |
| Input voltage | 9-32 V DC |
| Mode | Continuous / duty cycle / motion activated |
| Max power consumption | 17 W |
| Weight | 1.3 kg (2.86 lbs) |
| Dimensions | 161 x 170 x 136 mm (6.30 x 6.70 x 5.4 in) |
| Power lead (PVC) | 3 x 0.75 mm² / 3 m (18 AWG / 9.8 ft) |
| Operating temperature | 0° to + 50° C (32° to 122° F) |
Beam angle
UV222 is available on both 60° and 100°, but every lamp is measured after production and sent with its unique specifications report.
Light measurement results
|
60° beam angle |
100° beam angle |
|
|---|---|---|
|
126.92 mW |
Output – total optical power flux, 200 nm – 850 nm |
75.72 mW |
|
120.79 mW |
Far UV-C 200 nm – 230 nm |
58.79 mW |
|
6.81 mW |
VIS-IR: 400 nm – 850 nm |
10.71 mW |
|
0.926 % |
Radiated power/lamp power |
0.57 % |
|
222 nm |
Peak emission wavelength |
222 nm |
|
13.8 μW/cm2 |
UV (222 nm) irradiance at centre at 1 m (3’ 10”) |
3.2 μW/cm2 |
|
60 ° |
Beam angle |
100 ° |
Photometrics and exposure time SARS-CoV2/COVID-19
The spatial and spectral distribution of the light is measured on each lamp using a 2-axis goniometer giving the entire 3D distribution of the Far UV-C light emitted by it.
60° beam angle
Peak emission wavelength: 222 nm
Output power in range (200-230 nm): 115 mW
Dose needed (222 nm, COVID-19) 90% inactivation for
aerosols: 390 μJ/cm2
Dose needed (222 nm, COVID-19) 90% inactivation for
surfaces: 600 μJ/cm2
100° beam angle
Peak emission wavelength: 222 nm
Output power in range (200-230 nm): 70 mW
Dose needed (222 nm, COVID-19) 90% inactivation for
aerosols: 390 μJ/cm2
Dose needed (222 nm, COVID-19) 90% inactivation for
surfaces: 600 μJ/cm2
Wavelength
■ UV222 Far UV-C excimer lamp with an optical band-pass filter
■ A typical krypton chloride 222 nm Far UV-C excimer lamp without an optical band-pass filter
WARNING!
Unfiltered Far UV-C can cause cancer and may increase the risk of cataracts.
Dimensions
UV222 Industrial includes an installation bracket for fixing the lamp on any surface.
Colours
- The standard colour is brushed aluminium.
- Custom colours are available on request.
Installation
The installation plate allows for direct set up on surfaces like walls and ceilings, as well as attachment to wall brackets with tilt and swivel functions, clamps, etc.
Ordering information
| UV222 Vehicle 60°, brushed aluminium | 80101000 |
| UV222 Vehicle 60°, custom colour | 80101001 |
| UV222 Vehicle 100°, brushed aluminium | 80101010 |
| UV222 Vehicle 100°, custom colour | 80101011 |
