UV222 Industrial
Disinfecting lamp for industrial use
With its IP66 rating, UV222 Industrial is protected against pressurised water and ready to be installed in all settings requiring intensive and regular cleaning.
For industry use
Ultraviolet light is widely used for disinfection in many industries, including medicine and food processing. The application of this technology in livestock production is a more recent development and is increasingly being used, especially on swine farms, as producers look for ways to improve biosecurity in response to frequent outbreaks of devastating diseases, such as African swine fever.
UV222 Industrial has been developed combining the benefits Far-UVC light and a housing adapted to the hardest environments. Thanks to its IP66 rating, UV222 Industrial is dust-tight and protected against pressurised water, which makes it ideal for the disinfection of production areas, barns, and stables for the protection of living animals, offering continuous disinfection with harmless radiation.
-
Specifications
Light source Krypton chloride excimer lamp Wave length 222 nm Output (60° beam angle) 115 mW (Typical) Output (100° beam angle) 70 mW (Typical) Input voltage 100-240 V AC 50/60 Hz Mode Continuous / duty cycle / motion activated Max power consumption 20 W Weight 3 kg (6.6 lbs) Dimensions 300 x 168 x 113 mm (11.8 x 6.6 x 4.4 in) Power lead (rubber) 3 x 0.75 mm² / 10 m (18 AWG / 32.8 ft) Operating temperature -10° to + 50° C (14° to 122° F) -
Beam angle
Beam angle
UV222 is available on both 60° and 100°, but every lamp is measured after production and sent with its unique specifications report.
-
Light measurement results
Light measurement results
60° beam angle
100° beam angle
126.92 mW
Output – total optical power flux, 200 nm – 850 nm
75.72 mW
120.79 mW
Far UV-C 200 nm – 230 nm
58.79 mW
6.81 mW
VIS-IR: 400 nm – 850 nm 10.71 mW
0.926 %
Radiated power/lamp power
0.57 %
222 nm
Peak emission wavelength
222 nm
13.8 μW/cm2
UV (222 nm) irradiance at centre at 1 m (3’ 10”)
3.2 μW/cm2
60 °
Beam angle
100 °
-
Photometrics and exposure time SARS-CoV2/COVID-19
Photometrics and exposure time SARS-CoV2/COVID-19
The spatial and spectral distribution of the light is measured on each lamp using a 2-axis goniometer giving the entire 3D distribution of the Far UV-C light emitted by it.
60° beam angle
Peak emission wavelength: 222 nm
Output power in range (200-230 nm): 115 mW
Dose needed (222 nm, COVID-19) 90% inactivation for
aerosols: 390 μJ/cm2
Dose needed (222 nm, COVID-19) 90% inactivation for
surfaces: 600 μJ/cm2100° beam angle
Peak emission wavelength: 222 nm
Output power in range (200-230 nm): 70 mW
Dose needed (222 nm, COVID-19) 90% inactivation for
aerosols: 390 μJ/cm2
Dose needed (222 nm, COVID-19) 90% inactivation for
surfaces: 600 μJ/cm2 -
Wavelength
Wavelength
■ UV222 Far UV-C excimer lamp with an optical band-pass filter
■ A typical krypton chloride 222 nm Far UV-C excimer lamp without an optical band-pass filter
WARNING!
Unfiltered Far UV-C can cause cancer and may increase the risk of cataracts. -
Dimensions
Dimensions
UV222 Industrial includes an installation bracket for fixing the lamp on any surface.
-
Color
Colors
- The standard color is brushed aluminium.
- Custom colors are available on request.
-
Installation
Installation
The installation plate allows for direct set up on surfaces like walls and ceilings, as well as attachment to wall brackets with tilt and swivel functions, clamps, etc.
-
Downloads
Do you want the Product Datasheet or the Technical & Installation manual?
UV222 Industrial - Technical Installation Manual
Introducing Mercury-Free Far-UVC Technology with KrCl Lamps
UV Medico is proud to introduce an advanced disinfection technology: mercury-free, 222 nm Krypton-Chloride (KrCl) excimer lamps. These innovative lamps offer a safe, sustainable alternative to traditional mercury-based systems, aligning with modern environmental and health standards. Ideal for cleanroom environments, KrCl lamps assure high-level disinfection efficacy without compromising human or ecological safety.
Get in touch with UV Medico
Should you be keen to explore the capabilities of the UV222 Industrial, just complete the form. Our team will connect with you promptly, offering insights and support tailored to your needs.
Combatting Mold with Advanced Far-UVC Solutions
Mold spores can compromise indoor air quality, triggering a range of health issues from severe allergic reactions to life-threatening infections, particularly in hospital environments. Our latest research reveals that intermittent, low-dose applications of UV222 are surprisingly effective in halting mold growth, ensuring cleaner air while maintaining safe environments for human presence. This innovative approach not only aligns with real-world usage but also opens new frontiers for maintaining health standards in medical facilities and beyond.
Latest Knowledge from UV Medico
2 min read
Can Far-UVC help in improving Bathroom Decontamination?
Nov 12, 2024 by Emilie Hage Mogensen